Health Topics

There will be 6 cycles of treatment. Each cycle uses a different frequency setting. Follow the steps below to complete your child's treatment.

Setting the Machine for the 1st Cycle of Treatment:  

1. Make the following setting on the machine:
2. Frequency = 8 Hz
3. Pressure = your Starting Pressure 
4. Time = 5 minutes 
5.  Press the ON button to begin treatment
6.  After five minutes of treatment, pause the vest generator to deflate the vest (if the vest does not deflate disconnect one end of one of the hoses)
7.  Perform two or three sets of Huff Coughs to remove mucus from your child's lungs

Note: During vest treatments, you will want to keep your child's airways moist by taking a nebulizer treatment during the entire time your child is on the vest. One way to do this is by filling your child's nebulizer cup with about 6-8 mL of sterile normal saline.

Repeat Steps 2 – 4 for remaining cycles 

Setting the Machine for the 2nd - 6th Cycle of Treatment:

• You will do five more treatment cycles
• Each 5-minute cycle will have a different frequency setting and starting pressure
• Cycle 2: 
• Frequency setting = 9 Hz 
• Starting pressure = Same as 1st treatment 
• Time = 5 minutes 
• Cycle 3: 
• Frequency setting = 10 Hz 
• Starting pressure = decrease setting by one 
• Time = 5 minutes 
• Cycle 4: 
• Frequency setting = 18 Hz 
• Starting pressure = decrease setting by 2/3 (see chart below) 
• Time = 5 minutes 
• Cycle 5: 
• Frequency setting = 19 Hz 
• Starting pressure = same as Cycle 4 
• Time = 5 minutes 
• Cycle 6: 
• Frequency setting = 20 Hz 
• Starting pressure = Same as Cycle 4 and Cycle 5 
• Time = 5 minutes

(Pressure settings are read from the Starting Pressure down)

*Note- some vest companies will display their pressure as a single number, double number or a percentage. (6, 60, or 60%)